SOLD

Build dB2
Model AMX
Body Figured South American mahogany, 1-piece
Neck 5-piece: 2 laminates of figured South American mahogany + 2 birdseye maple stringers + figured katalox core
Fretboard Figured katalox, 16″ radius, 25.5″ scale, 24 frets; fretboard and headstock binding, stainless steel frets
Electronics
  • Bare Knuckle Aftermath 7 calibrated set, open coils
  • 4PDT toggle switch with both humbuckers split in middle position (black)
  • Bourns Premium master volume 500k pot
  • Kill switch (heavy-duty, momentary, black)
  • Recessed locking Neutrik output jack with gold contacts
  • All interconnects made with RoHS-compliant lead-free solder and teflon-coated wire
  • GraphTech GHOST piezo system
Hardware Bridge: recessed Hipshot flat-mount fixed 7 (black)
Bridge Saddles: GraphTech piezo
Tuners: Hipshot Grip-Lock (black)
Nut: GraphTech Tusq XL
Date started January 14, 2010
Date completed


This guitar came from the same billet of curly South American mahogany as dB1, so it’s a “sibling” build, but has some key differences such as the neck and fretboard woods, the single-cutaway body style and the addition of the GraphTech GHOST piezo system.

Our original plan was to do Prototype 3 as a Cutlass, but then we came up with the AMX design and it worked better with the stunning piece of figured mahogany we had available. Those black lines are left over from the Cutlass template trace.

Our original plan was to do Prototype 3 as a Cutlass, but then we came up with the AMX design and it worked better with the stunning piece of figured mahogany we had available. Those black lines are left over from the Cutlass template trace.

Proto 3 AMX parts roughed out. Figured mahogany body, 5-piece laminate neck (9 if you include the veneers), figured katalox fretboard.

Proto 3 AMX parts roughed out. Figured mahogany body, 5-piece laminate neck (9 if you include the veneers), figured katalox fretboard.

Neck laminates from the outside in: figured mahogany, birdseye maple, figured katalox core.

Neck laminates from the outside in: figured mahogany, birdseye maple, figured katalox core.

Figured mahogany headstock will be grafted on at the scarf joint.

Figured mahogany headstock will be grafted on at the scarf joint.

Here it is laid out. This will be the first AMX!

Here it is laid out. This will be the first AMX!

Bookmark and Share